Skip to content
Home » Services » Fire Sprinkler Inspection NJ

Fire Sprinkler Inspection NJ

JT Fire & Safety serves building owners in Somerville, Somerset County, and throughout New Jersey.

For a walkthrough of the visit and how to prepare the building, read what to expect during a fire sprinkler inspection.

What JT inspects and tests

JT inspects and tests wet-pipe, dry-pipe, pre-action, and deluge systems, including sprinkler heads, piping, risers, valves, gauges, water supplies, alarms, and related components.

Inspection is the visual check. Testing is the operational check required for that system.

New Jersey requirements

The New Jersey fire code sends inspection, testing, and maintenance of water-based fire protection systems to NFPA 25. The NFPA 25 forms must comply with Annex B.

The New Jersey fire code also says a field-tested backflow preventer is tested annually, and a construction certificate does not replace the fire official’s forward-flow test.

The Division of Fire Safety bulletin notes that more frequent checks exist and that the annual inspection is work for a permitted contractor.

NFPA 25 Inspection and Testing Schedule

NFPA 25 sets how often each part of a water-based fire sprinkler system is inspected and tested. The table below shows the most common items for wet and dry pipe systems. Your exact schedule depends on your system type, how valves are supervised, and the edition of NFPA 25 your fire official enforces.

Frequency What gets inspected or tested
Weekly Control valves secured only with seals. Reduced pressure (RPZ) backflow preventers.
Monthly Control valves that are locked. System gauges. Dry pipe, preaction and deluge valve exteriors.
Quarterly Electrically supervised control valves. Alarm valve exteriors. Fire department connections. Waterflow alarm and supervisory devices. Dry pipe valve priming water and quick-opening devices. Main drain test where the system is supplied through a backflow preventer or pressure-reducing valve.
Semiannual Testing of waterflow alarm devices and control valve supervisory (tamper) switches.
Annual Sprinklers, pipe, hangers and braces, viewed from the floor. Hydraulic design sign. Dry pipe valve interior. Control valve operation. Main drain test. Backflow preventer test. Dry pipe valve trip test. Low air pressure alarm.
Every 3 years Dry pipe valve full-flow trip test. Dry system air leakage test.
Every 5 years Internal inspection of alarm valves, check valves, backflow preventers, strainers and filters. Gauge replacement or calibration check.

Some items are done by the building owner, such as weekly and monthly valve and gauge checks. JT Fire & Safety handles the quarterly, semiannual, annual, 3-year and 5-year inspection and testing work and can tell you which items apply to your building.

What Your Inspection Report Includes

  • The property, system type and areas covered
  • Each item inspected or tested and whether it passed
  • Gauge readings and main drain test results, which can be compared from year to year
  • Deficiencies and impairments found, with their location
  • Recommended corrections

Keep the report on file. Your fire official, insurance carrier or property manager may ask for it.

When the Inspection Finds a Problem

A deficiency is a condition that needs correcting, such as a painted or obstructed head, a missing spare head, a damaged hanger or a gauge past its replacement date. An impairment is more serious: it means part or all of the system may not work as designed. Impairments should be corrected right away, and the fire official and insurance carrier usually need to be notified while the system is out of service.

We can quote corrections directly from your inspection report and document each repair once it is done. Learn more about our fire sprinkler repair service.

Fire Sprinkler Inspection FAQ

How often does a fire sprinkler system need to be inspected in NJ?

New Jersey enforces NFPA 25 through the state fire code. Most systems need quarterly and annual inspection and testing, plus additional items every 3 and 5 years.

How long does an inspection take?

It depends on the size of the building and the number of systems. A small building with one wet system usually takes a few hours. Larger or multi-system buildings take longer.

Will the sprinkler system be shut off during the inspection?

Some tests, such as the main drain test and valve operation, briefly affect the system. We coordinate with you and your alarm monitoring company before testing so alarms are expected and the system is returned to normal when we finish.

What is the difference between a deficiency and an impairment?

A deficiency is a condition that needs correction but does not take the system out of service. An impairment means the system, or part of it, may not operate as designed and should be corrected right away.

Licensed and Certified

  • NJ Division of Fire Safety permitted Fire Protection Contractor, Permit P01486
  • Owner Juan Taveras holds NJ DFS C2 Fire Sprinkler System certification #186947
  • NICET Level II certified in Inspection & Testing and in System Layout
  • Backflow prevention device testing certified

Scheduling and documentation

Call JT Fire & Safety at (908) 333-2590 or use the contact page to schedule service. Frequency and the exact checklist follow the code and the system type.

After the inspection you receive a written record of what was inspected and tested and what was found.